Skip to topic | Skip to bottom
Home

Start of topic | Skip to actions

Accuracy Study for Ghost-fluid Method

We use the exact solution of a stationary rotating vortex for 2D Euler equations as initial conditions and to quantify the error in the density in the L1 norm. This specific exact solution is available under VortexRotationExactSolution. The computational codes are available here: [Clawpack], [WENO]

For the following tests we use the computational domain [0,1]x[0.1] and the parameters %MATHMODE{ x_c=0.5, \quad y_c=0.5, \quad R=0.4, \quad t_{end}=1, \quad \Delta h=\Delta x=\Delta y=1/N. }% The ghost fluid boundary is a circle around %$(x_c,y_c)$% with radius %$R_G$% and rotates by itself with velocity %$U_W$%.

We access the accuracy of the Ghost-fluid method implemented generically in AMROC for the

  • truly second-order multi-dimensional Wave Propagation Method with Roe solver and 2 imbedded ghost cells used, CFL=0.9,
  • first-order Godunov-splitting with Roe solver and 2 imbedded ghost cells used, CFL=0.9,
  • pure WENO-7 Pt and 3 imbedded ghost cells used, CFL=0.6.
  • The entire density loss throughout the calculation because of the non-conservative boundary is measured.

Consistency test - boundary rotation in uniform flow

In order to test, if the imbedded boundary method is able to reproduce a uniform flow field in a non-trivial boundary situation, we use %MATHMODE{ \alpha=0, \quad R_G=R, \quad U_W=R\pi. }% For Euler equations zero flow should be introduced and first order unstructured schemes that use a consistent numerical flux at the imbedded boundary, i.e. that default to the exact flux function, can be shown to preserve constant flow for all time steps.

First test with reflecting slip wall boundary conditions at the imbedded boundary:

N Wave Propagation Godunov-Splitting WENO - 7 Pt
Error Order Mass loss Error Order Mass loss Error Order Mass loss
20 1.729e-05   -9.136e-07 3.718e-05   -7.567e-07 3.232e-05   6.297e-06
40 1.646e-05 0.07 -5.025e-08 1.736e-05 1.10 -3.570e-08 2.024e-05 0.68 -2.086e-08
80 5.595e-06 1.56 -2.383e-09 5.702e-06 1.61 -1.190e-09 5.919e-06 1.77 -3.122e-10
160 1.472e-06 1.93 -1.343e-10 1.399e-06 2.03 -9.116e-11      

Second test with extrapolation boundary conditions at the imbedded boundary:

N Wave Propagation Godunov-Splitting WENO - 7 Pt
Error Order Mass loss Error Order Mass loss Error Order Mass loss
20 5.970e-05   -8.862e-07 4.491e-05   -1.105e-06 0.0001210   5.108e-05
40 2.571e-05 1.22 -4.916e-08 1.766e-05 1.35 -4.630e-08 1.574e-05 2.94 -4.361e-08
80 3.316e-06 2.95 -2.402e-09 3.697e-06 2.26 -2.103e-09 4.358e-06 1.85 -1.821e-09
160 1.168e-06 1.51 -1.359e-10 1.176e-06 1.65 -1.098e-10      

  • As the error arises only at the boundary, the accuracy of the imbedded boundary dominates the measured error. The accuracy of the underlying scheme becomes negligible.
  • The error is non-uniform along the boundary as the GFM boundary conditions are not invariant to rotation. A movie with the temporal development of the magnitude of the velocity vector (Wave Propagation) clearly shows this.
  • Tumbnail for VelocWaveProp.mpg

Shear flow test 1 - negligible flow along imbedded boundary

In order to test the imbedded boundary method for a situation with hardly any boundary interaction we use %MATHMODE{ \alpha=R\pi, \quad R_G=R, \quad U_W=0. }% Imbedded boundary conditions: reflecting slip wall.

N Wave Propagation Godunov-Splitting WENO - 7 Pt
Error Order Mass loss Error Order Mass loss Error Order Mass loss
20 0.0120056   0.0079236 0.0144203   0.0020241 0.0064736   0.0028641
40 0.0035074 1.78 0.0011898 0.0073070 0.98 0.0001300 0.0017008 1.93 0.0004790
80 0.0014193 1.31 0.0001588 0.0038401 0.93 -0.0001036 0.0006816 1.32 -5.878e-05
160 0.0005032 1.50 5.046e-05 0.0018988 1.02 -2.783e-06      

  • As the dependency of the solution on the imbedded boundary is negligible all methods show their unperturbed order of accuracy as in VortexRotationAccuracyStudy.

Shear flow test 2 - strong flow along imbedded boundary

In order to test the imbedded boundary method for a situation with very strong shear flow we place the imbedded boundary exactly at point of maximal shear flow veclocity, i.e. %MATHMODE{ \alpha=R\pi, \quad R_G=R/2, \quad U_W=0. }%

First test with reflecting slip wall boundary conditions at the imbedded boundary:

N Wave Propagation Godunov-Splitting WENO - 7 Pt
Error Order Mass loss Error Order Mass loss Error Order Mass loss
20 0.0423925   0.0423925 0.0271446   0.0271446 0.0260747   0.0260747
40 0.0358735 0.24 0.0358735 0.0242260 0.16 0.0242260 0.0236603 0.14 0.0236603
80 0.0212340 0.76 0.0212340 0.0128638 0.91 0.0128638 0.0128931 0.88 0.0128931
160 0.0121089 0.81 0.0121089 0.0070906 0.86 0.0070906      

Second test with extrapolation boundary conditions at the imbedded boundary:

N Wave Propagation Godunov-Splitting WENO - 7 Pt
Error Order Mass loss Error Order Mass loss Error Order Mass loss
20 0.0575232   0.0575232 0.0512302   0.0512302 0.0376556   0.0376556
40 0.0479454 0.26 0.0479454 0.0417552 0.30 0.0417552 0.0303673 0.31 0.0303673
80 0.0327630 0.55 0.0327630 0.0272841 0.61 0.0272841 0.0196045 0.63 0.0196045
160 0.0206183 0.67 0.0206183 0.0166053 0.72 0.0166053      

  • The accuracy of the imbedded boundary dominates the measured error. All schemes show the same degradates accuracy.
  • Godunov-splitting and WENO-7Pt show a comparable absolute error. Both methods use only fluxes normal to a cell boundary.
  • The multi-dimensional Wave Propagation Method shows a larger absolute error, which indicates that a lumped boundary treatment is inappropriate for this scheme.
  • The exact solution is not symmetric around R/2. Although the solution has the property %$U(R/2-\epsilon)=U(R/2+\epsilon)$%, the pressure is not symmetric, i.e. %$p(R/2-\epsilon)\ne p(R/2+\epsilon)$% .
  • Boundary conditions implemented with ghost cells make a significant modelling error.

Conclusions

  • Even analytically constructed values in ghost cells are not seen correctly in the multi-dimensional finite volume scheme. (See consistency test).
  • Interpolation at points away from the boundary to construct boundary values can be inappropriate to model boundary conditions. (See test for shear flow test 2).
  • Lumping of boundary and interpolation diffuse shear flows (See test for shear flow test 2).
  • Lumped boundary results in loss of conservation. Under grid refinement this error always declines, but no order measurement seems reasonable.


-- RalfDeiterding - 23 Feb 2005

I Attachment sort Size Date Who Comment
VelocWaveProp.mpg 1733.9 K 01 Mar 2005 - 05:57 RalfDeiterding Development of length of velocity vector for Wave Propagation

You are here: Amroc > GFMHome > GFMVortexRotation

to top

Copyright © 1997-2024 California Institute of Technology.